Create Your First Project
Start adding your projects to your portfolio. Click on "Manage Projects" to get started
F/A-18 Super Hornet 3D Model (STL/3MF) – 3D Print Download
Download Here
This F/A-18 Super Hornet 3D printable model is great for desk display, collection shelves, gifts, and aviation fans.
On this page you’ll find recommended print settings, finishing tips, and the download link.
Recommended FDM Print Settings (PLA / PETG)
Best for: easy printing + strong parts
Material: PLA (easy) / PETG (tougher)
Nozzle: 0.4 mm
Layer height: 0.16–0.20 mm (use 0.12 for sharper panel lines)
Walls/Perimeters: 3
Top/Bottom: 4–6 layers
Infill: 10–20% (increase to 25% for thin wings)
Supports: Only where needed (Tree supports recommended)
Adhesion: Brim if wings/tail are thin
Speed: 40–60 mm/s (slow down to 30–40 for small details)
Orientation Tips (FDM)
Print wings flat for cleaner top surfaces
Print the fuselage so visible surfaces face upwards (reduces support scars)
If the model is multi-part, keep seams on the underside when possible
Resin Print Settings (Optional section)
Best for: maximum detail
Layer height: 0.03–0.05 mm
Supports: light supports on hidden surfaces
Hollowing: optional (add drain holes if hollowed)
Post-cure: follow your resin brand’s cure time
Finishing (makes it look “premium”)
Light sanding: 400 → 800 grit on support marks
Primer + paint: gray primer, then your preferred aircraft scheme
Optional: panel line wash for details
Download
Use the button below to download the model (STL/3MF) and view the original listing.
Attribution / Note
This is a fan-made 3D model and is not affiliated with Boeing, the U.S. Navy, or any official brand. (The real aircraft is the Boeing F/A-18E/F Super Hornet.